-
- 塑料软管
0.7mm耐磨物料输送PU软管 MP07
0.7mm耐磨物料输送PU软管 MP07
颜色：半透明PU（聚醚型聚氨酯）管壁，带螺旋状镀铜钢丝加强
温度范围：- 40 / 100℃
结构特性：内壁平滑，耐磨损，耐油性耐水解，耐霉菌，该软管无毒，不含卤素，不含塑化剂
应用：磨损性颗粒的抽吸和输送，也可用于水性物料的输送例如泥浆，污水等
螺旋方向：右手螺旋
连接：桥式卡箍
| 编码 | 内径 | 壁厚 | 弯曲半径 | 工作压力 | 真空度 | 重量 | 每卷长度 |
| mm | mm | mm | bar | bar | kg/m | m | |
| MP07020 | 20 | 0.70 | 20 | 1.5 | 0.5 | 0.25 | 20 |
| MP07025 | 25 | 0.70 | 25 | 1.4 | 0.4 | 0.28 | 20 |
| MP07032 | 32 | 0.70 | 32 | 1.3 | 0.35 | 0.34 | 20 |
| MP07035 | 35 | 0.70 | 38 | 1.2 | 0.3 | 0.38 | 20 |
| MP07038 | 38 | 0.70 | 38 | 1.1 | 0.25 | 0.40 | 20 |
| MP07040 | 40 | 0.70 | 40 | 0.9 | 0.2 | 0.43 | 20 |
| MP07045 | 45 | 0.70 | 45 | 0.9 | 0.2 | 0.48 | 20 |
| MP07051 | 51 | 0.70 | 51 | 0.9 | 0.2 | 0.51 | 20 |
| MP07055 | 55 | 0.70 | 55 | 0.9 | 0.2 | 0.55 | 20 |
| MP07060 | 60 | 0.70 | 60 | 0.8 | 0.19 | 0.60 | 20 |
| MP07063 | 63 | 0.70 | 63 | 0.8 | 0.19 | 0.63 | 20 |
| MP07065 | 65 | 0.70 | 65 | 0.8 | 0.19 | 0.65 | 20 |
| MP07070 | 70 | 0.70 | 70 | 0.8 | 0.19 | 0.69 | 20 |
| MP07076 | 76 | 0.70 | 76 | 0.6 | 0.18 | 0.74 | 20 |
| MP07080 | 80 | 0.70 | 80 | 0.6 | 0.18 | 0.79 | 20 |
| MP07090 | 90 | 0.70 | 90 | 0.5 | 0.15 | 0.88 | 20 |
| MP07102 | 102 | 0.70 | 100 | 0.5 | 0.15 | 1.04 | 15 |
| MP07110 | 110 | 0.70 | 110 | 0.4 | 0.1 | 1.14 | 15 |
| MP07115 | 115 | 0.70 | 115 | 0.4 | 0.1 | 1.15 | 15 |
| MP07120 | 120 | 0.70 | 120 | 0.38 | 0.1 | 1.16 | 15 |
| MP07127 | 127 | 0.70 | 127 | 0.35 | 0.08 | 1.20 | 15 |
| MP07140 | 140 | 0.70 | 140 | 0.3 | 0.08 | 1.34 | 15 |
| MP07152 | 152 | 0.70 | 150 | 0.25 | 0.05 | 1.43 | 15 |
| MP07160 | 160 | 0.70 | 160 | 0.2 | 0.05 | 1.52 | 15 |
| MP07175 | 175 | 0.70 | 175 | 0.2 | 0.04 | 1.66 | 15 |
| MP07180 | 180 | 0.70 | 180 | 0.3 | 0.07 | 1.76 | 15 |
| MP07203 | 203 | 0.70 | 200 | 0.15 | 0.03 | 2.00 | 15 |
| MP07228 | 228 | 0.70 | 225 | 0.15 | 0.03 | 2.24 | 10 |
| MP07254 | 254 | 0.70 | 250 | 0.1 | 0.02 | 2.48 | 10 |
| MP07279 | 279 | 0.70 | 280 | 0.1 | 0.02 | 3.12 | 10 |
| MP07305 | 305 | 0.70 | 305 | 0.09 | 0.02 | 3.66 | 10 |
